Page 23 - Exitflex
P. 23
Tungsten carbide inserts Product specification sheet Tungsten carbide inserts








Cut to your own specification and supplied in bulk
carbide for each of these inserts that are best suited
Exitflex manufactures all sizes of tungsten carbide
for your specific applications.
inserts for airless and mixed Air applications. Exitflex can also provide different grades of tungsten
These inserts are manufactured in four outer Spray angles and pattern widths quoted are as
shapes with different geometry of the inner dome manufactured and tested on water. Spray widths
cavity, thus affecting the atomization quality and can vary and depend upon viscosity, solids content
pattern uniformity for the best performance in all and pressure employed.
applications.


Type Part Dimensions Flow rate Angle
reference range L/min range in degrees
number

SPEEDY 88-030 0.18 to 13.70 10° to 110°
R 1.5
4
1.8
ø 4.3


C (USA) 63-530 R 1.5 0.37 to 2.95 10° to 110°
5.3
1.8
ø 7


C (USA) 63-530 R 2.4 3.42 to 13.70 20° to 110°
5.3
1.8
ø 7
ø 4.85
D (Air mix) 63-525 0.18 to 7.40 10° to 100°
6.7
3.3

ø 7
   18   19   20   21   22   23   24