Page 15 - Exitflex
P. 15
Reversible tip systems Product specification sheet Reversible tip systems Spray angles and pattern widths quoted are as





manufactured and tested on water. Spray widths can
vary and depend upon viscosity, solids content and
All Exitflex reversible tips integrate high quality
tungsten carbide inserts, which provide maximum
(Q2) at a new working pressure (P2),
erosion resistance for high-pressure spraying pressure employed. To determine a new flow rate
use the following formula, knowing that P1 = 100 Bar
Despite their extreme hardness, Tungsten carbide
tips do wear. Replace them before its costs
a great deal of money in labor and material! The following equivalent orifice size ranges are
All tips are laser-marked. Customised marking suggested for the material listed:
may be applied on demand. Stains and lacquers: 0.006in to 0.013in
Oil based paints 0.013in to 0.015in
Latex emultions 0.017in to 0.021in
Heavy paints, latex 0.023in to 0.029in
Block fillers, epoxies 0.029in to 0.061in
Remember - Lower viscosity materials such as
lacquers means smaller orifice sizes and heavier
viscosity coatings such as oil-based paints means
larger orifice sizes.

Designation MWP Compatibility with other Standard tip Superfinish Twintip Line Marking
manufacturers guards Part ref. n° Part ref. n° Part ref. n° Part ref. n°
SPEEDY 2 350 bar No, Yes Yes Yes Yes
Compact dedicated 88-091 88-092 88-093 88-090
light Exitflex
guard only


SPEEDY 4 350 bar No Yes Yes Yes Yes
Traditional dedicated 88-491 88-492 88-493 88-490
design Exitflex
guard only



SPEEDY 5 517 bar Yes Yes Yes Yes Yes
Versatile together with 88-591 88-592 88-593 88-590
unique design Exitflex seal



Exitflex offers different guards to suit the above-mentioned tips. Enquire for more detail.
   10   11   12   13   14   15   16   17   18   19   20